Vacuum dryer

Online customer service：点击这里给我发消息

点击这里给我发消息

Phone：025-85718786 13605185897
Fax：025-85769880

Technical Features
Technical Parameters
Related Products

- Notes：For raw material,if its volume has great change before and after dry,then its filling coefficient may be increased or decreased suitably.
  
  Speed adjusting motor of 0-6rpm might be chosen according to the user’s requirements. The following aspects should be pointed out when to order:
  1.The above-mentioned parameters are calculated based on material density of 0. 6g/cm3.If it's over, please point out.
  2. If certificate for pressure vessel is required, please point out.
  3. If glass lining for interior surface is required, please point out.
  If the material is explosive, or flammable, the calculation should be made according to trial result.
  
  Notice in order
  Its heating has three ways i.e. steam, hot water, heat conduction oil.
  When order, please indicate the temperature of raw material to be undertaken or the operation temperature of drier in order to choose or provide suitable heat source for you
  When dry viscous raw material, our factory will design special stirring device in the chamber.
  The auxiliary parts of vacuum drying system can be supplied and installed by our factory. Please indicate them when order.
  If having special requirements, our factory can also design, manufacture and install as request.
  The cost of complete equipment should be increased in accordance with the needs.

Name Model	100	350	500	750	1000	1500	2000	3500	4500	5000
Volume inside the tank(L)	100	350	500	750	1000	1500	2000	3500	4500	5000
Max loading capacity(L)	50	175	250	375	500	750	1000	1750	2250	2500
Max loading weight(kg)	40	120	200	300	400	600	800	1000	1350	1800
heating area	1.16	1.5	2	2.63	3.5	4.61	5.58	7.5	9.6	13.8
Revolution(rpm)	3~13					6	5	4	4	4
Power of motor(kw)	0.75	1.1	1.5	2.2	3	4	5.5	7.5	11	15
Occupied area.L×W(mm)	2160×800	2160×800	2350×800	2560×1000	2860×1300	3060×1300	3260×1400	3760×1800	3960×2000	4400×2500
Rotating height(mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100	4200
Design pressure inside the tank(MPa)	-0.1~0.15
Design pressure of jacket(MPa)	≤0.3
冷凝器换热面积(M2)	1	2	3	6	6	10	15	25	30	30
Weight(kg)	800	1100	1200	1500	2800	3300	3600	6400	7500	8600

·

NEXT：GHL series wet granulator

Coating granulation series

Vacuum dryer

TIME:22-01-18

Notes：For raw material,if its volume has great change before and after dry,then its filling coefficient may be increased or decreased suitably.

Speed adjusting motor of 0-6rpm might be chosen according to the user’s requirements. The following aspects should be pointed out when to order:
1.The above-mentioned parameters are calculated based on material density of 0. 6g/cm3.If it's over, please point out.
2. If certificate for pressure vessel is required, please point out.
3. If glass lining for interior surface is required, please point out.
If the material is explosive, or flammable, the calculation should be made according to trial result.

Notice in order
Its heating has three ways i.e. steam, hot water, heat conduction oil.
When order, please indicate the temperature of raw material to be undertaken or the operation temperature of drier in order to choose or provide suitable heat source for you
When dry viscous raw material, our factory will design special stirring device in the chamber.
The auxiliary parts of vacuum drying system can be supplied and installed by our factory. Please indicate them when order.
If having special requirements, our factory can also design, manufacture and install as request.
The cost of complete equipment should be increased in accordance with the needs.

NEXT：GHL series wet granulator

Copyright Nanjing Tianhuang Machinery Co., Ltd. All rights reserved Su ICP No. 19024329 Technical support: Erun

Copyright Nanjing Tianhuang Machinery Co., Ltd. All rights reserved Su ICP No. 19024329Technical support: Erun